Quarzoflex is acement-based highly technological adhesive for the application of porcelainized gres, absorbent and non-absorbent ceramics and Natural(Aran White) Stone(Juparana Colombo)s, including big and superimposed ones. Thanks to its thixotropic quality, Quarzoflex, is the ideal product for the application on vertical surfaces.

Application surface: the surface of application must be stabilised and dust-free.

Preparation and application: for one bag of Rimurkol Quarzoflex add 5.5 litres of water; mix mechanically or by hand, until you obtain a completely homogeneous mix; plece the Tiles(White Galaxy) on fresh adhesive. applying adequate pressure.

Yield: about 3,5 kg/m²

Puttying of runs: on the wall, after 3-5 hours; on the floor after 24 hours.

Warnings and recommendations: do not use at temperatures below +5oC or above + 35oC. Always allow adequate expansion joints